Q: What does PURRRFORM do?
A: PURRRFORM coats the inside of your engine where the friction is, so you wear out the PURRRFORM layer “instead” of your engine’s parts. PURRRFORM reduces the friction and repairs the surface making the engine more “efficient”. This efficiency will save you money on gas and costly repairs. PURRRFORM increases compression and horse power and decreases fuel consumption, engine heat, oil consumption and harmful emissions.

Q: Can I use PURRRFORM in a gas or diesel powered engine?
A: Yes, PURRRFORM was developed to be used with a particular oil type.

Q: Where do I add PURRRFORM engine treatment?
A: Add PURRRFORM to your OIL crank-case. DO NOT add to fuel tank.

Q: Does it make sense to use PURRRFORM in a “new” or an “overhauled” engine?
A: Yes. PURRRFORM is great for old engines and new. It will keep and protect new engines like new for much longer than an engine running without PURRRFORM and most likely increase engine performance and save you significant money on fuel.

Q: Does PURRRFORM make running-in shorter?
A: No. PURRRFORM cuts down negative effects of running-in.

Q: Does PURRRFORM shorten the life of motor oil in the engine?
A: No. PURRRFORM, by reducing oil loss, can indirectly extend its life because remainders of oil burn get into the oil more slowly.

Q: Can I add PURRRFORM if compression is normal and oil is not over consumed? Will it do any harm?
A: No, it won't! PURRRFORM is a high quality metal conditioner that will considerably improve tribologic (friction) properties of oil and parts and will protect your engine from wear.

Q: Is it possible to apply a restoring dose of PURRRFORM for the 2nd time after oil change and does it make any sense?
A: To restore a very worn out engine or preserve the PURRRFORM effect after 15,000 miles, we recommend an additional dose.

Q: Does it make sense to add PURRRFORM if after an oil change the car has been driven 1000 miles.
A: Yes it does. The supporting dose is 1 jar every oil change.

Q: Does it make sense to use additional PURRRFORM into an older more worn-out engine?
A: To get the effect, you have to follow the instructions precisely. The biggest dose of PURRRFORM depends on the run (see the application prescription).

Oil volume (Quarts)	Bottles of Purrrform (50ml) for each range of Mileage on Vehicle
	Before 100K *	100K - 170K **	170K - 250K **	After 250K **
3 - 6	1	2	3	3
7 - 12	2	3	4	4
13 - 20	3	4	4	4

Q: Is it necessary to use engine flush for oil system when I am using PURRRFORM?
No, it's not necessary.

Q: Can you use PURRRFORM in turbo engines and what are its characteristics at high temperatures?
A: Yes. PURRRFORM can be used in engines of this type. The higher the temperature, the better it works.

Q: How does PURRRFORM affect properties of oil?
A: PURRRFORM significantly reduces the rate of the wear out process by approximately 2-3 times. Operating temperature is reduced and the oil acidity process slows down, thus, properties of the oil are preserved longer.

Q: Will PURRRFORM clog operating oil channels or filters?
A: NO. PURRRFORM will not clog operating oil channels or filters.

Q: Can I add PURRRFORM after I've changed rings?
A: We recommend applying a preventive dose of PURRRFORM in both new cars and after a ring change or an overhaul.

Q: What sort of oil is best to use with PURRRFORM?
A: PURRRFORM doesn't affect oil properties, it does not matter what type of oil you use whether Natural or Synthetic….PURRRFORM works with metal surfaces of your engine’s parts.

Q: What will happen if I put PURRRFORM into a cold engine, warm the engine up and start moving in a normal mode?
A: It is best to add PURRRFORM into a warmed up engine and then idle for 15 minutes….but it will still work in a cold engine.

Q: Can I add PURRRFORM without changing oil?
A: Effectiveness of PURRRFORM is equal in both old and new oil…although it is best to not have a very dirty or clogged oil filter.

Q: How long does PURRRFORM last?
A: PURRRFORM is a once-a-year treatment and will last 15,000 miles. You can change your oil as many times as you like after you treat your engine with PURRRFORM and it still remains bonded to the metal parts. Please retreat once per year to maintain peek performance and realize gas savings.

Q: How does PURRRFORM affect oil properties?
A: PURRRFORM doesn't interact with oil chemically, it only works with metals, and it creates a porous coating that keeps oil inside.

Q: Oil Changes?
A: After you treat your engine with PURRRFORM, you may change your oil as many times as you like and PURRRFORM will remain on your Engine.

Q: Does PURRRFORM contain Teflon (PTFE) or Graphite particles?
A: NO!

Q: Will PURRRFORM clog the Oil Filter?
A: NO! The particles are ten times smaller than the openings in your filter.

Q: How much PURRRFORM do I use?
A: Engines with up to :

6 Quarts of Oil	= 1 Bottle
7 Quarts to 12 Quarts of Oil	= 2 Bottles
13 Quarts to 20 Quarts of Oil	= 3 Bottles

Q: Why should I use PURRRFORM Metal Treatment?
A: PURRRFORM Metal Treatment successfully repairs the worn our parts of your engine and significantly reduces friction and heat in your engine with its patented technology. Your vehicle is a major investment; it makes sense to do everything possible to protect your engine, increase its efficiencies, and maintain optimum performance.

Q: How is PURRRFORM Metal Treatment different than other Metal Treatments?
A: PURRRFORM Metal Treatment provides an advanced extreme pressure nano-particle coating technology not found in any other Metal Treatment. PURRRFORM Metal Treatment formula is patented, your assurance that it is the only one of its kind and does what it claims. Unlike many Metal Treatments, PURRRFORM products do not contain problem causing material such as PTFE resins, "molys," zinc, copper or graphite.

Q: What's the difference between an oil treatment and PURRRFORM Metal Treatment?
A: Rather than just adding thickeners to the oil, the patented PURRRFORM formula actually interacts with your engine's metal surfaces through a physio-chemical process, creating unique superior resistance to extreme friction and heat. Simply, it "bonds" with metal to form a protective layer and significantly reduces friction which in turn will extend the life of your engine and increase gas mileage.

Q: Can I use PURRRFORM Metal Treatment with any engine?
A: PURRRFORM Metal Treatment is safe and effective for new or used, gasoline or diesel engines. It can also be used in rotary engines.

Q: Will PURRRFORM void my Warranty?
A: No. Please Read the PDF File on Warranties. Click Here!

Q: Where can I get the MSDS Sheet on PURRRFORM?
A: Click Here!

Home | Test Results | Instructions and Applications | Testimonials | FAQs | Guarantee