| Dosage and use for Cars & Trucks
For an engine restoration:
|
Oil volume
(Quarts) |
Bottles of Purrrform (50ml) for each range of Mileage on Vehicle |
|
Before 100K * |
100K - 170K ** |
170K - 250K ** |
After 250K ** |
|
3 - 5 |
1 |
2 |
3 |
3 |
|
6 - 10 |
2 |
3 |
4 |
4 |
| 11 - 15 *** |
3 |
4 |
4 |
4 |
| 16 - 20 *** |
4 |
5 |
6 |
6 |
| 21 - 30 *** |
6 |
6 |
7 |
7 |
| 31 - 40 *** |
8 |
9 |
10 |
10 |
| 41 - 45 **** |
9 |
10 |
11 |
11 |
* For anti-wear protection: 1 bottle of Purrrform per 3 - 5 quarts of oil. Will last between 15,000 and 20,000 miles. For optimum performance add one bottle of Purrrform every time you change your vehicles oil. In case of severe wear out and/or substantial oil blow by, smoke from exhaust pipe, increased vibration and noise from engine, we suggest to add extra bottle of Purrrform after 15-30 minutes on idle after the initial treatment.
** For best results, separate application of each bottle of Purrrform by 15-30 minutes on idle or 50 miles of normal run.
*** For big engines with oil system capacity exceeding 11 quarts we suggest to use 150 ml bottles of Purrrform, calculating the required amount of Purrrform - 10 ml for each quart of oil.
**** For big engines with oil system capacity exceeding 41 quarts we suggest to use 350 ml bottles of Purrrform, calculating the required amount of Purrrform - 10 ml for each quart of oil.
How to use
- Change oil and filter
- Run the engine to warm it up to its operating temperature and shut it down
- Shake the bottle for 20-30 sec
- Pull on lid ring to open bottle
- Pour the contents of the bottle into the oil system
- Idle the engine for 10-15 min
- Repeat the above steps for each treatment if necessary
Note: When a dosage of more than 2 bottles is needed, the most efficient way is to add the second bottle after 15-30 minutes on idle or 50 miles.
_____________________________________ Dosage and use for Boats & Marine Vehicles
For an engine restoration:
|
Oil volume
(Quarts) |
Bottles of Purrrform (50ml) for each range of Hours of Operation |
|
Before 2k hours |
2k – 5k |
5k-10k |
After 10k |
|
3 - 5 |
1 |
2 |
3 |
3 |
|
6 - 8 |
2 |
3 |
4 |
4 |
For anti-wear protection: 1 bottle of Purrrform per 3 - 5 quarts of oil. Will last between 15,000 and 20,000 miles. For optimum performance add one bottle of Purrrform every time you change your vehicles oil.
How to use
- Change oil and filter
- Run the engine to warm it up to its operating temperature and shut it down
- Shake the bottle for 20-30 sec
- Pull on lid ring to open bottle
- Pour the contents of the bottle into the oil system
- Idle the engine for 10-15 min
Note: When a dosage of more than 2 bottles is needed, the most efficient way is to add the second bottle after 50 miles.
_____________________________________
Dosage and use for Motorcycles and ATVs
For an engine restoration:
|
Oil volume
(Quarts) |
Bottles of Purrrform (50ml) for each range of Mileage on Vehicle |
|
Before 50K |
50K – 100K |
100K – 150K |
After 150K |
|
3 - 5 |
1 |
2 |
3 |
3 |
|
6 - 8 |
2 |
3 |
4 |
4 |
For anti-wear protection: 1 bottle of Purrrform per 1 to 5 quarts of oil. Will last between 15,000 and 20,000 miles. For optimum performance add one bottle of Purrrform every time you change your vehicles oil.
How to use
- Change oil and filter
- Run the engine to warm it up to its operating temperature and shut it down
- Shake the bottle for 20-30 sec
- Pull on lid ring to open bottle
- Pour the contents of the bottle into the oil system
- Idle the engine for 10-15 min
Note: When a dosage of more than 2 bottles is needed, the most efficient way is to add the second bottle after 50 miles.
Any questions regarding your application please email info@purrrform.com |